- AlphaCore 1.0 、AlphaStation XP1000 EV67/667にて起動。
Linux version 2.6.11-1.1180axp_FC3 (root@alpha.rdsor.ro) (gcc version 3.4.3 20050221 (Red Hat 3.4.3-20)) #1 Mon Apr 18 11:34:15 EEST 2005
Booting GENERIC on Tsunami variation Monet using machine vector Monet from SRM
Major Options: DEBUG_SPINLOCK MAGIC_SYSRQ
Command line: root=/dev/sda3 rhgb quiet
memcluster 0, usage 1, start 0, end 217
memcluster 1, usage 0, start 217, end 98294
memcluster 2, usage 1, start 98294, end 98304
freeing pages 217:2048
freeing pages 3492:98294
reserving pages 3492:3494
Initial ramdisk at: 0xfffffc002fd24000 (1212061 bytes)
4096K Bcache detected; load hit latency 21 cycles, load miss latency 127 cycles
Console graphics on hose 0
On node 0 totalpages: 98294
DMA zone: 98294 pages, LIFO batch:8
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: root=/dev/sda3 rhgb quiet
PID hash table entries: 4096 (order: 12, 131072 bytes)
Using epoch = 2000
Turning on RTC interrupts.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 6, 524288 bytes)
Memory: 762368k/786352k available (3095k kernel code, 21912k reserved, 659k data, 232k init)
Calibrating delay loop... 1330.04 BogoMIPS (lpj=649216)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 8192 bytes)
checking if image is initramfs... it is
Freeing initrd memory: 1183k freed
NET: Registered protocol family 16
EISA bus registered
pci: enabling save/restore of SRM state
PCI: Bus 2, bridge: 0001:01:08.0
IO window: 8000-8fff
MEM window: disabled.
PREFETCH window: disabled.
PCI: Enabling device: (0001:01:08.0), cmd 7
SMC37c669 Super I/O Controller found @ 0x3f0
Linux Plug and Play Support v0.97 (c) Adam Belay
usbcore: registered new driver usbfs
usbcore: registered new driver hub
audit: initializing netlink socket (disabled)
audit(1116451081.432:0): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 8192 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 19DC4D889F660A1
- User ID: Red Hat, Inc. (Kernel Module GPG key)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
rtc: SRM (post-2000) epoch (2000) detected
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
[drm] Initialized drm 1.0.0 20040925
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
CY82C693: IDE controller at PCI slot 0000:00:07.1
CY82C693: chipset revision 0
CY82C693: not 100% native mode: will probe irqs later
CY82C693U driver v0.34 99-13-12 Andreas S. Krebs (akrebs@altavista.net)
ide0: BM-DMA at 0x8000-0x8007, BIOS settings: hda:pio, hdb:pio
PCI: Enabling device: (0000:00:07.2), cmd 7
ide1: BM-DMA at 0x8008-0x800f, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: Compaq CRD-8322B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
Probing IDE interface ide2...
Probing IDE interface ide3...
hda: ATAPI 32X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
input: AT Raw Set 2 keyboard on isa0060/serio0
input: PS/2 Generic Mouse on isa0060/serio1
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 112Kbytes
TCP established hash table entries: 65536 (order: 6, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 3670016 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
NET: Registered protocol family 1
Freeing unused kernel memory: 232k freed
SCSI subsystem initialized
qla1280: QLA1040 found on PCI bus 1, dev 6
scsi(0:0): Resetting SCSI BUS
scsi0 : QLogic QLA1040 PCI to SCSI Host Adapter
Firmware version: 7.65.00, Driver version 3.25
Vendor: IBM Model: DMVS18V Rev: 0100
Type: Direct-Access ANSI SCSI revision: 03
scsi(0:0:0:0): Sync: period 10, offset 12, Wide, Tagged queuing: depth 255
SCSI device sda: 35843670 512-byte hdwr sectors (18352 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 35843670 512-byte hdwr sectors (18352 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: COMPAQ Model: BD01873624 Rev: BDC4
Type: Direct-Access ANSI SCSI revision: 02
scsi(0:0:1:0): Sync: period 10, offset 12, Wide, Tagged queuing: depth 255
SCSI device sdb: 35565080 512-byte hdwr sectors (18209 MB)
SCSI device sdb: drive cache: write through
SCSI device sdb: 35565080 512-byte hdwr sectors (18209 MB)
SCSI device sdb: drive cache: write through
sdb: sdb1
Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
Vendor: COMPAQ Model: BD01873624 Rev: BDC4
Type: Direct-Access ANSI SCSI revision: 02
scsi(0:0:2:0): Sync: period 10, offset 12, Wide, Tagged queuing: depth 255
SCSI device sdc: 35565080 512-byte hdwr sectors (18209 MB)
SCSI device sdc: drive cache: write through
SCSI device sdc: 35565080 512-byte hdwr sectors (18209 MB)
SCSI device sdc: drive cache: write through
sdc: sdc1
Attached scsi disk sdc at scsi0, channel 0, id 2, lun 0
Vendor: SONY Model: SDT-9000 Rev: 04a8
Type: Sequential-Access ANSI SCSI revision: 02
scsi(0:0:5:0): Sync: period 10, offset 12
md: raid0 personality registered as nr 2
[2492] init_ext3_fs(), err = 0
md: Autodetecting RAID arrays.
md: autorun ...
md: considering sdc1 ...
md: adding sdc1 ...
md: adding sdb1 ...
md: created md0
md: bind
md: bind
md: running:
md0: setting max_sectors to 128, segment boundary to 32767
raid0: looking at sdc1
raid0: comparing sdc1(17775808) with sdc1(17775808)
raid0: END
raid0: ==> UNIQUE
raid0: 1 zones
raid0: looking at sdb1
raid0: comparing sdb1(17775808) with sdc1(17775808)
raid0: EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 35551616 blocks.
raid0 : conf->hash_spacing is 35551616 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 8 bytes for hash.
md: ... autorun DONE.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
st: Version 20041025, fixed bufsize 32768, s/g segs 256
Attached scsi tape st0 at scsi0, channel 0, id 5, lun 0
st0: try direct i/o: yes (alignment 512 B), max page reachable by HBA 98294
Floppy drive(s): fd0 is 2.88M
FDC 0 is a post-1991 82077
Linux Tulip driver version 1.1.13 (May 11, 2002)
tulip0: EEPROM default media type Autosense.
tulip0: Index #0 - Media 10baseT (#0) described by a 21142 Serial PHY (2) block.
tulip0: Index #1 - Media 10base2 (#1) described by a 21142 Serial PHY (2) block.
tulip0: Index #2 - Media AUI (#2) described by a 21142 Serial PHY (2) block.
tulip0: Index #3 - Media 10baseT-FDX (#4) described by a 21142 Serial PHY (2) block.
tulip0: Index #4 - Media 100baseTx (#3) described by a 21143 SYM PHY (4) block.
tulip0: Index #5 - Media 100baseTx-FDX (#5) described by a 21143 SYM PHY (4) block.
eth0: Digital DS21143 Tulip rev 65 at fffffd0209051000, **:**:**:**:**:**, IRQ 45.
PCI: Enabling device: (0001:02:0a.0), cmd 5
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd 0000:00:07.3: Found HC with no IRQ. Check BIOS/PCI 0000:00:07.3 setup!
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET: Registered protocol family 10
Disabled Privacy Extensions on device fffffc000183e520(lo)
IPv6 over IPv4 tunneling driver
EXT3 FS on sda3, internal journal
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on md0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2097136k swap on /dev/sda2. Priority:-1 extents:1
parport0: PC-style at 0x3bc [PCSPP]
ieee1394: Initialized config rom entry `ip1394'
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (3071 buckets, 24568 max) - 384 bytes per conntrack
NET: Registered protocol family 17
eth0: Using user-specified media 10baseT-FDX.
eth0: 21143 10baseT link beat good.
eth0: no IPv6 routers present
parport0: PC-style at 0x3bc [PCSPP]
lp0: using parport0 (polling).
lp0: console ready
htt_xbe(3692): unaligned trap at 00000200001d24c4: 000000012005965c 2d 2
htt_xbe(3692): unaligned trap at 0000000120003d18: 000000011ffff9e4 2d 1
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
kernel 2.6でよみがえる僕らの64-bitマシン、詳細は後ほど。
|
